Concept illustration
Industry primers for UAV system builders.
Educational articles on supply-chain layers, control–power matching and low-altitude component priorities, not customer case studies.
Start with architecture, then matching, then mission.
Each note is written to help teams ask better interface questions before locking a BOM.
UAV Battery Shipping: DG Rules and Export Crating
How to ship UAV lithium batteries legally: UN 3480/3481 classes, 30% state-of-charge limits, ISPM 15 crating, moisture control and the export document set.
UAV Carbon Fiber Tube Selection: Boom Sizing Guide
How to specify UAV carbon fiber tubes and booms: diameter, wall thickness, layup, pultruded vs roll-wrapped, stiffness targets, joint design and the RFQ data th
UAV Pilot Production & NPI: Prototype to Repeatable Build
Move a UAV design from prototype to repeatable production: first-article inspection, tolerance stack-up, process documentation and the pilot-run exit criteria.
Counter-UAS Detection Components: RF, Radar and EO/IR Guide
Specify a counter-UAS detection chain: RF direction finding, radar, EO/IR and acoustic sensors, the fusion layer, and the radar cross-section problem.
UAV Component Warranty and RMA: What to Ask Before…
A procurement guide to UAV component warranty and RMA terms — what a warranty actually covers and the crash, modification and environmental exclusions, the RMA
Waterproofing UAV Components: IP Ratings, Conformal…
A procurement engineering guide to waterproofing UAV components — decoding IP54, IP65, IP67 and IP68 ratings, conformal coating for flight controllers and ESCs,
UAV VTOL Transition Components: Tilt-Rotor,…
A procurement engineer's guide to VTOL transition components — tilt-rotor actuators, tail-sitter airframes, dual propulsion systems, transition flight controlle
UAV Wind Resistance and Gust Handling: Components…
What actually determines a UAV wind rating — thrust margin, control authority, airframe stiffness and wind sensing. How to read the datasheet gaps and specify w
UTM and Detect-and-Avoid Integration: Component…
A procurement engineering guide to BVLOS UAV operations — the regulatory chain from remote ID (FAA Part 89, ASTM F3411) to detect-and-avoid (RTCA DO-365), remot