Concept illustration
Industry primers for UAV system builders.
Educational articles on supply-chain layers, control–power matching and low-altitude component priorities, not customer case studies.
Start with architecture, then matching, then mission.
Each note is written to help teams ask better interface questions before locking a BOM.
Precision Agriculture UAV Components: Spraying
How to select UAV components for agricultural spraying and spreading — high-flow pump systems, corrosion-resistant airframes, RTK-guided row navigation, terrain-following flight controllers
UAV Connectors, Wiring and Power Distribution:
How to select UAV connectors (JST GH, Molex PicoBlade, XT30/XT60/XT90, MR30, Anderson Powerpole), specify wire gauge, design power distribution boards and wiring harnesses for industrial dro
ArduPilot vs PX4: Which Open-Source Autopilot
A procurement-focused comparison of ArduPilot and PX4 for industrial UAVs. Covers flight modes, hardware compatibility, safety features, developer ecosystem, and the decision framework that
UAV Antenna Selection and Placement: Types, Gain
How to select and place UAV antennas — comparing omnidirectional, patch, helical and MIMO types, gain and beamwidth trade-offs, polarization matching, ground planes on carbon fiber airframes
UAV Electronics ESD Protection: TVS Diodes,
How to protect UAV electronics from electrostatic discharge — TVS diode selection, clamping voltage and capacitance for high-speed lines, grounding strategy, connector and antenna port prote
UAV Sensor Fusion and Redundant Navigation: Dual
How to architect redundant navigation for industrial UAVs — dual/triple IMU voting schemes, dual GNSS with RTK, barometer and magnetometer fusion, EKF sensor health monitoring, and failover
UAV Mission Planning and Flight Software: Waypoints,
A procurement engineering guide to UAV mission planning and flight software — the mission-file data model, survey pattern and coverage math, geofencing and terrain-following safety layers, f
UAV Payload Power Budgeting: Regulators, Filters
A power-engineering guide to UAV payload power budgeting — how to build a per-payload power budget, choose linear vs buck vs buck-boost regulators, filter switching noise away from GNSS and
Maritime & Offshore UAV Operations: Shipboard Components
Components that keep UAVs operational over saltwater — corrosion-resistant airframes and fasteners, shipboard launch and recovery, wind-over-deck limits, salt fog testing, and the procuremen
UAV Components for Logistics and Delivery: Motors,
How to select UAV components for cargo delivery and logistics — heavy-lift propulsion, long-endurance batteries, BVLOS communications, precision landing navigation and payload release mechan
UAV Electronics Manufacturing Quality: IPC-A-610
A procurement engineering guide to UAV electronics manufacturing quality — IPC-A-610 Class 2 vs Class 3 acceptance criteria, J-STD-001 process control, AOI and X-ray inspection, ionic contam
BLDC vs PMSM vs PMAC: Choosing the Right Motor
A procurement-focused comparison of brushless DC (BLDC), permanent magnet synchronous (PMSM) and permanent magnet AC (PMAC) motor topologies for industrial UAV propulsion — outrunner vs inru